We all know that tanking is an important step in bathroom and wetroom installation, but it can be messy and time-consuming. But that could now be a thing of the past thanks to the new sealing system from Dural!
DURABASE WS WarpSeal is a new self-adhesive sealing system designed to make waterproofing before tiling quick, easy and mess free. Installation is twice as fast since you don't need to spend time mixing and applying adhesive.
Benefits of DURABASE WS WarpSeal:
- Lightweight - no more lugging around tubs and bags of adhesive, simply grab your roll of WarpSeal and any corners/tapes you need and you are ready to go! Around 3.2 kg of glue and 0.5 to 1 litre of water is used for each square meter of sealing – you won't need any of that with the self-adhesive DURABASE WS sealing system.
- Watertight - DURABASE WS is tested according to ETA and abP so it will create a watertight seal under your tiles.
- Mess-free - since there's no adhesive required there's no dust, no mixing, and no mess! This also saves time cleaning up after installation.
- Wide matting - The 1m extra-wide sealing membrane is the base of the DURABASE WS self-adhesive sealing system. A special squeegee is included with each roll for simple and easy handling.
- Dry system - No more residual moisture lingering behind the tile seal for years and no drying times - for example, with liquid sealing 2 passes with a waiting time of approx. 4 hours in between are needed and curing time on top of that.
- Quick installation - Installation is twice as fast as no time needed to mix and apply adhesive. The self-adhesive DURABASE WS sealing system: Apply primer – fasten – peel off protective film – press on – tile on top – done!
- Strong self-adhesive - Within seconds, DURABASE WARPSEAL achieves an adhesive strength of more than 20 t/m2.
- Sticks to anything - The self-adhesive DURABASE WS sealing system sticks to a wide variety of materials such as wood, concrete, screed, plaster, plastics, stainless steel, glass, enamel and cement-based building materials. All parts of the seal are flexible and stretchable and adapt optimally to the smallest imperfections.
How to install DURABASE WS WarpSeal:
DURABASE WS WarpSeal is quick and easy to install. First determine which products you will need to seal your chosen area:
- Dural Durabase Warpseal Self Adhesive Mat - peel and stick waterproofing membrane
- Dural Durabase Warpseal Starter Kit - tanking kit containing 10m of matting, primer spray, tape & pipe collars
- Dural Durabase Warpseal Self Adhesive Corner Tape - 10m roll of tape with trowel protection
- Dural Durabase Warpseal Spray Primer - for improved adhesion on absorbent substrates
- Dural Durabase Warpseal Self Adhesive Skirting Tape - waterproofing for wall-to-floor connections
- Dural Durabase Warpseal Self Adhesive Fleece Joining Tape - covers overlapping ends of matting
- Dural Durabase Warpseal ½” Pipe Collar - waterproofing around pipes
- Dural Durabase Warpseal Internal Corner - waterproofing corners
- Dural Durabase Warpseal External Corners - waterproofing corners
- Dural Durabase Warpseal 3D Right Corner Pieces - waterproofing corners
- Dural Durabase Warpseal 3D Left Corner Pieces - waterproofing corners
Full Dural DURABASE WS WarpSeal installation instructions can be found here.