LTP Power Stripper - Available in 1 litre and 5 litres

LTP Power Stripper is a high performance intensive cleaner for interior & exterior use.

LTP Power Stripper is suitable for travertine, stone, sandstone, slate, marble, porcelain, granite, terracotta, quarry, brick, concrete and external paving. A high performance intensive cleaner for the stripping and cleaning of vitrified glazed ceramics, travertine, natural stone, sandstone, slate, marble, granite, terracotta, quarry, brick, concrete, external paving, terrazzo and other mineral floors & walls. LTP Power Stripper helps tp remove oxidised linseed oil and other mineral oils.

Directions for using LTP Power Stripper:

To establish whether the tiles are colour fast and to determine optimal dilution for LTP Power Stripper, we recommend always testing the product on an inconspicuous area prior to general application.

Surface cleaning: 1:12 in warm water

Deep stripping: 1:6 in warm water

In extreme cases: 1:4 in warm water (e.g.Removal of linseed oil)

Sweep or dry mop floor to remove grit and surface dirt. Mix stripper solution according to required dilution. Working in manageable sized areas, mop on solution to thoroughly wet floor. Let it work for 5 – 10 minutes, keeping floor damp with further solution should it begin to be absorbed. Agitate floor surface using a mildly abrasive pad. If the floor will stand up to it, machine scrub with a stripping pad. Remove resulting dirty residue using clean warm water and absorbent cloths. If you are treating a large area a wet vacuum will prove helpful. Rinse thoroughly and allow to dry completely before applying further treatments. You may need to repeat washing process a couple of times on severely contaminated surfaces.

Coverage:

Surface cleaning: 60 m² per litre

Deep stripping: 30 m² per litre

In extreme cases: 15 m² per litre

Storage:

Store in a cool, dry, frost-free environment

Shelf Life – Up to 5 years